MANUAL NF-802
Description:
- Scan&Wiremap
- Dual-use test mode. Wiremap operation can be performed in Scan mode.
- QC Test
- Accurately measure which end of the network cable is not crimped.
- Digital signal scanning
- Dedicated digital signal anti-interference.
- Multi-function testing cable mode
- Test cable pass/short circuit/open circuit/cross.
- Port Flash
- To locate network port by the flashing port light on a server/switch/hub/router port.
- Withstand Voltage
- Interface Withstand Voltage 60V, support POE scanning without burning.
- NCV strong current detection
- Quickly identify strong electricity in the work environment and provide safety guarantee.
- LED lighting
- Help you to scan the cables clearly in the dark room.
- Super strong momentum
- Built-in 1400mAh polymer lithium battery, Type-C Charge.
- Certification
- Passes RoHS, FCC, and CE compliance testing, and Noyafa is certified to the ISO 9001 standard.
| Types |
Function |
Instruction |
| Emitter |
Suitable for network cable |
CAT5 CAT6 |
| Anti-jamming scanning |
√ |
| Low battery prompt |
Below 3.3V+0.1V power indicator flashes |
| scrimping response speed |
<1s |
| Power supply battery |
3.7V,1400Ah Lithium polymer battery |
| Stand-by current |
Wiremap / SCAN/ QC< 25mA，Flash< 150mA |
| Interface Type |
RJ11、RJ45 |
| Dimension |
60x135x30mm |
| Receiver |
Suitable for network cable |
CAT5 CAT6 |
| Sensitivity adjustment |
√ |
| NCV |
√ |
| lighting |
√ |
| Headphone jack |
√ |
| Wiremap |
√ |
| Power supply battery |
3.7V,1400Ah Lithium polymer battery |
stand-by
current
|
≤35mA |
| Maximum working current |
≤280mA |
| Dimension |
50x198x30mm |
 
|
