Products

Active equipment / LAN Testers

NF-8209

MANUAL NF-8209

Features:

Digital cable scanning - Three scan modes for options to track cable: AC filter mode/ Analog mode/ PoE mode.
Multi Function - Cable length measurement , cable faults testing, PoE testing, hub blink and NCV function, detect PSE standards Power supply modes.
Cable continuity testing & NCV - Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V).
PoE testing - Identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).
Cable testing - UTP telephone and coaxial network cable tester that also detects the pin-out of the cables.
Fault distance location - Measure cable length and locate fault distance accurately for lan cable, the range is 200m.
Hub blink - Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
LCD - The display results is more direct, more visual and clearer.
Certification - Passes RoHS, FCC, and CE compliance testing, and Noyafa is certified to the ISO 9001 standard.

Transmitter	Wiremap	Cable type	CAT5, CAT6 (STP & UTP)
		Test with switch directly	Yes
		Max range	600m
	Length	Cable type	CAT5, CAT6 (STP & UTP)
		Test range	2~200m
		Accuracy	±1.6m
		Breakage location	Yes
	Scan	Cable type	CAT5, CAT6 (STP & UTP)
		Max. signal voltage	8V p-p
		Frequency	130KHz
		AC filter	Yes
		Max range	600m
	POE	Test range	DC 5~60V standard / non-standard PoE switch
		Voltage display	Yes
		PoE type	IEEE 802.3af/at
	LCD display		128*64 Dot-matrix with backlight
	Power supply		AAA*3 (included)
	Low battery warning		2.7 V
	Auto-off time		15min, 30min , 60min , Off
	Voltage protection		DC48V, 5mA
	Max working current		<150mA
Receiver	Sensitivity adjustable		Yes
	AC Voltage detecting		Yes
	Lamp		Yes
	Battery type		9V*1 (included)
	Low battery warning		6± 0.5V
	Max working current		<100mA
Remote	Wiremap Port		RJ45
	Voltage protection		DC48V, 5mA