Products
| Cable Cat. 6/6A |
 |
Category 6 cable (Cat 6), is a standardized twisted pair cable for Ethernet and other network physical layers that is backward compatible with the Category 5/5e and Category 3 cable standards. Cat 6 must meet more stringent specifications for crosstalk and system noise than Cat 5 and Cat 5e. The cable standard specifies performance of up to 250 MHz, compared to 100 MHz for Cat 5 and Cat 5e. Whereas Category 6 cable has a reduced maximum length of 55 metres when used for 10GBASE-T, Category 6A cable is characterized to 500 MHz and has improved alien crosstalk characteristics, allowing 10GBASE-T to be run for the same 100-metre maximum distance as previous Ethernet variants.
|
|
| Cable Cat.7 |
 |
Category 7 cable are backward compatible with Class D/Category 5e and Class E/Category 6. Class F features even stricter specifications for crosstalk and system noise than Class E. The Category 7 cable standard was ratified in 2002 to allow 10 gigabit Ethernet over 100 m of copper cabling. The cable contains four twisted copper wire pairs, just like the earlier standards. Category 7 cable can be terminated either with 8P8C compatible GG45 electrical connectors which incorporate the 8P8C standard or with TERA connectors. When combined with GG-45 or TERA connectors, Category 7 cable is rated for transmission frequencies of up to 600 MHz.
|
|
| Crimping tool for RJ11/RJ12/RJ45 HT-468B |
 |
This tool is used to crimp telephone and data plugs. This professional grade crimping has an ergonomic design, providing a firm and comfortable grip. Is equipped to crimp to 4 / 6 / 8 positions, and it includes a stripper and cutter feature.
|
|
| Crimping tool RJ45/RJ12 MNN-686R |
 |
|
Enables crimping RJ45/RJ12 modular computer plugs, stripping and cutting excess wire. Front crimping ensures that all contacts are pressed evenly. |
|
| Crimping tool RJ45/RJ12 T-WC-05 Cablexpert Pass-Through |
 |
|
Universal modular crimping tool with cutting function. Crimps and cuts extended wires in one motion.
Compatible with most modular pass-through connectors.
Also suitable for all standard 8P8C, 6P6C, 6P4C modular plugs.
Built-in cutter and stripper for flat and round cable.
|
|
| Crimping tool for toolless keystone jack |
 |
|
Crimping tool (parallel crimping pliers) provides the convenience, efficiency and harmlessness approach to crimp the toolless RJ45 Keystone Jack , Terminal Field Plug and familiar type connectors on the cable. It help installer to make sure IDCs are surely connected with wires.
|
|
| Insertion tool LSA-PLUS type Krone |
 |
LSA-PLUS Insertion Tool, used to terminate and cut wire on keystone modules and patch-panels.
Features:
• Ensures proper insertion of wire
• Ensures proper insertion of wire
• Cuts excess wire in one click operation
• Swing out hook, used to pull out connected wire
• Swing out blade, used to remove module from outlet
|
|
| Impact punch down tool type 110 HT-324B |
 |
Punch Down Tool is a small hand tool used by telecommunication and network technicians. It is used for inserting wire into insulation-displacement connectors type 110 on punch down blocks, patch panels, keystone modules. |
|
| Impact punch down tool type 110 TL-110B |
 |
Punch down tool cuts and terminates cable into a 110 patch panel or keystone jack. Removable blade of impact style tool with twist and lock sockets can be stored in the tool body for transport. Adjustable impact force settings (Lo/Hi) for cable termination into a jack, block, or patch panel with 110 IDC terminals. |
|
| Network cable stripper |
 |
Adjustable Cable Jacket Stripper HT-S501B. Can be used for wire Coax or (UTP/STP) wire and multi-conductor cable from 3.2mm-9mm MAX. Irregular out-shape insulation can be put into the front "V" and "U" guide, rotate the tool 1-3 times by index finger for stripping the outer insulations easily. |
|
| Easy type stripper |
 |
|
Plastic Punch down tool with 2 blades. Great for CAT-5, CAT-5e, and CAT-6 data cable.Strip twisted-pair UTP/STP data cables and wires and terminates wires into 110 block.
Easy and safe to use,punch down wires on modular connectors.
|
|
| Cable comb |
 |
The Cable Comb substantially lowers labour time in any application where a multitude of single cables must be bundled neatly for an appearing professional installation. This innovative two-piece tool enables installers to quickly and efficiently straighten, organize, and lash separate cables into multiple cable bundles with ease. Compatible with any cables or wires up to 8 mm in diameter. |
|
| Cage nut tool |
 |
|
This tool makes the process of inserting and removing cage nuts a quick and simple process. |
|
|
