Перейти на главную страницу Карта сайта Напишите нам письмо en  ro  ru
Products
Contact us
Price-List

Products

19" Patch-panel 24 port (ODF)
1U fixed patch panel has been designed to accept up to 24 fibers housed within a 1U space. With the ability to use a full array of adapter types, this panel offers a flexible solution to the end user; enabling them to incorporate a multi functional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibers. In the addition to array of adapters the panel also offers multiple cable entry solutions, up to 8 standard entry points for loose tube, tight buffered, pre-terminated and steel tape armoured cable.
19" Patch-panel 48 port, 2U
2U fixed patch panel has been designed to accept up to 48 fibers housed within a 2U space. With the ability to use a full array of adapter types, this panel offers a flexible solution to the end user; enabling them to incorporate a multi functional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibers. In the addition to array of adapters the panel also offers multiple cable entry solutions, up to 8 standard entry points for loose tube, tight buffered, pre-terminated and steel tape armoured cable.
19" Patch-panel 72 port, 2U
2U fixed patch panel has been designed to accept up to 72 fibers housed within a 2U space. With the ability to use a full array of adapter types, this panel offers a flexible solution to the end user; enabling them to incorporate a multi functional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibers. In the addition to array of adapters the panel also offers multiple cable entry solutions, up to 8 standard entry points for loose tube, tight buffered, pre-terminated and steel tape armoured cable.
Visual Fault Locator 30mW
Visual fault locator is used for the measurement in single-mode or multi-mode fibers. 650nm Pen-type Visual Fault Finder for fiber tracing, fiber routing and continuity checking It features a stable red light, aluminium body design, a universal connector and an accurate measurement. It locates fibers, finds faults, verifies continuity and polarity.
Optical Fiber Identifier with VFL 10mW

 

Optical Fiber Identifier is used for nondestructive fiber identification. It is capable of detecting signal presence and direction in any location of Singlemode fiber. It also incorporates a Visual Fault Locator module with fault location function.

MAY11B Optical Power Meter
  • 7 Optic Wavelengths for Selection: 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm and 1625nm;
  • Large capacity lithium battery, USB charging mode, longer lasting & more convenient power supply;
  • LED Lighting Function: Capable of playing a role as a flashlight for line checking and constructing in the dark;
  • Automatic Shutdown: No operation within 10 minutes, saving energy;
  • Universal Interface Design: Suitable for 2.5mm universal adapter.
MAY13 Optical Power Meter with 15mW VFL and RJ45 Cable Tester
  • 3 in 1 Function: Optical Power Meter + Visual Fault Locator + Network Cable Test.
  • DIY self-calibration:According to the actual test needs self-test parameters.
  • Equipped with a small bright LED flashlight for easy inspection in dark environments.
  • With imported laser head, the distance is longer and the service life is longer.
  • Support three kinds of interface: FC interface, SC interface, ST interface.
MAY20B Optical Power Meter

 

  • Measurement of the power of optical sender (dbm and mW)
  • Insertion loss test of optical devices
  • Check fiber breakage, winding, ect
  • Fc/sc/st general-purpose interface
  • Wavelength:850/1300/1310/1490/1550/1625nm(power meter)
  • Wavelength:650Nm ( visual fault locator)

Patch Cords Single Mode UPC
Patch Cords Single Mode APC
Patch Cords Multi Mode OM2/OM3/OM4
Compressed Air 400ml
One-click cleaning pen 1.25mm for LC
One-click cleaning pen 2.5mm for SC/FC/ST
Fiber Optic Connector Cleaner CLC-3
This is a fiber optic cleaning kit of refillable cassette cleaners intended for use on the exposed ferrules of fiber optic connectors. It is an important accessory for maintaining and ensuring the quality of fiber optic connections. It provides a high-performance non-alcohol cleaner suitable to clean fiber end faces of any male fiber connector. Built with tough ABS resin impregnated with an anti-static cloth, the fiber cleaner box is perfect for both inside and outside plant applications. The anti-static cloth produces a rustic fiber tip and minimizes the attraction of contaminants. The cleaning tape replaced after more than 500 cleaning operations to reducing cleaning costs.
Taiwan Optical Cable Stripper CFS-3, 2-3mm, 0.9mm, 0.25mm
Design with 3 holes for optimal stripping (hole 1 – removes fiber jacket 1,6-3mm, hole 2 - removes buffer 0,6-0,9mm, hole 3 – removes acrilate coating 250um), precision blades ensure clean smooth strips without nicking fiber, ergonomic handle covered with thermoplastic elastomer grips.
Fiber cleaver FC-6S

 

With the introduction of the FC-6S, you now can have the ultimate precision tool for single fiber cleaving. It is a simple operation for the user to remove or install the single fiber adapter and alternate between single fiber cleaving.

Fiber cleaver FC800C

 

FC800C Fiber Cleaver is a high precision single fiber cleaver. It is a reliable cleaver for fiber optic network and FTTx FTTH applications. It contains 24-position blade and performs 48,000 times single fiber cleaves. A hexagonal wrench on the bottom of the cleaver allows you to adjust the cleaver blade flexibly.

Fiber optic adaptors, couplers
Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together. They come in versions to connect single fibers together (simplex), two fibers together (duplex), or sometimes four fibers together (quad).
Adapters are designed for multimode or singlemode cables. The singlemode adapters offer more precise alignment of the tips of the connectors (ferrules). It is ok to use singlemode adapters to connect multimode cables, but you should not use multimode adapters to connect singlemode cables. 
When connecting two multimode fibers, you should always make sure they are the same core diameter (50/125 or 62.5/125). 
Fiber optic adapters are typically connecting cables with similiar connectors (SC to SC, LC to LC, etc.). Some adapters, called "hybrid", accept different types of connectors (FC to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters, the adapters are significantly more expensive because of a more complicated design/manufacturing process.
Pigtails

Fiber optic pigtail is a fiber optic cable terminated with a factory-installed connector on one end, leaving the other end terminated. The connector side can be linked to equipment and the other side melted with optical fiber cables. Fiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.
Fiber optic pigtails are available in various types: Grouped by pigtail connector type, there are LC fiber optic pigtails, SC fiber pigtails and FC fiber pigtails, etc. By fiber type, there are single-mode fiber optic pigtail and multimode fiber optic pigtail.  

Splice trays
Splice trays are designed to hold individual or mass fusion spliced fibers. These trays are typically installed within fiber optic enclosures and patch panels.
Fast connectors

 

The fast connector is a pre-polished connector which uses mechanical clamping and aligning of a cleaved fibre end which is inserted into the connector body. The fast connector is available in a variety of connector types.

Protection sleeve
The protection sleeve is meant to protect the splice joint and exposed fiber after the splice has been completed. Fusion splicing is a process where two optical fibers are aligned and then joined together by melting the optical glass in a controlled manner.
Blank covers for unused ODF ports
Dust cover for fiber optic patch panel for SC/FC simplex adaptor. Avoid dust and dirt by using these caps on the unused ports.

e-mail hard@lantaur.md

© 2021 Lantaur Networking Moldova